First Look: TLP3906

Here's a page from the lab notebook:
there's that north blue light effect again on the white notebook paper


The TLP3906 is a possible replacement for the TLP591 photovoltaic isolator.  The PVI is the heart of a MOSFET solid state relay.  Here are the specs for open circuit voltage output and short circuit current:



The TLP3906 seems to be working nominally and should be fine for replacing the TLP591.  The TLP3906 is surface mount but it's fairly large with lead spacings of .1" and .3" - it is getting harder to see while soldering but that is true with through hole parts, too.

The only bad thing about the TLP3906 is that the marking on the black body is a little harder to see than the TLP591 in the white package.  The marking on the TLP3906 is also rotated 90 degrees compared to earlier parts like the TLP190.  Finally, the pin 1 designation isn't quite as easy to see (the deeper indentation).
TLP3906, two indents, rotated marking

TLP190B different PVI in white package



Best Regards,
Chuck, WB9KZY
http://wb9kzy.com/ham.htm



Comments